Brand Cali Bamboo®
Model Number 7204009100
Grain Distressed Fossilized® Strand Bamboo
Plank Length 36-1/4"
Plank Width 5-19/32"
Plank Thickness 1/4"
Milling Click Lock
Finish 10 Coat Durability Sealing System
Janka Rating 3329 lbs. See how this compares to other woods
Installation Type Glue Down, Floating Floor
Warranty 50 Year Residential / 15 Year Light Commercial
Indoor Air Quality Super EO, No added Urea Formaldehyde
Certification FloorScore® Certified
Sound Rating STC 61 & IIC 63 (installed with Cali Complete Underlayment)
STC 62 & IIC 63 (installed without any underlayment)
Characteristics Medium Distressed, Light Hand Scraped
Plank Color Range High
|Care and Maintenance
After Install/Floor Care Maintenance
•To clean up dried glue use either Bostik Ultimate Adhesive Remover or Titebond Adhesive Remover
•For Cleaning, we recommend dry or damp mopping as needed using Bona Professional cleaner or
•Do not use anything abrasive or harsh chemicals to clean the floor. Never use any of the following
products on your floor: ammonia-based cleaners, mineral spirits, acrylic finishes, wax-based products,
detergents, bleach, polishes, oil soap, abrasive cleaning soaps, acidic materials such as vinegar.
•Never apply wax treatments or top coats to the floor.
•Do not drag furniture across the floor, use felt pads on chair and furniture legs.
•Keep pet’s nails trimmed to avoid excess scratching.
•Sweep or vacuum the floor regularly to remove loose dirt. Do NOT use vacuums that use a beater bar or
turn beater bar off.
•Place quality walk-off mats at all entrances to retain tracked in dirt, grit and moisture, never use latex or
rubber backed mats as they can permanently stain the floor.
•Area rugs are also recommended in front of kitchen sinks and in high traffic areas.
•Although the Cali GeoWood Flooring is water resistant, it is still a best practice to avoid excessive
moisture on the floor. Therefore, we recommend soaking up spills immediately using a dry towel or dry
•Limit direct sunlight on floor by using curtains and blinds in areas that are exposed to high UV rays.
•Heating units or non-insulated ductwork close to the flooring or subfloor may cause “hot spots” which
must be eliminated prior to installation.
•Heavy furniture (500+ lbs.) may obstruct the free, natural movement of a floated floor. Restricting
this movement in certain areas can lead to problems such as buckling or separation when the floor
experiences natural expansion and/or contraction.